Compatible blocking cables

• YSQC0-012-0000 Cable Ricoh (20-pin)

• YSQC0-013-0000 Cable Ricoh (4-pin)

• YSQC0-059-0000 Cable Ricoh (4-pin) v2

Setting via device service menu

After entering device service menu, following steps have to be performed:

1. Navigate to system settings > operator tools > key counter administration

2. Here choose what features have to be blocked (usually copy, scan)

In case that the standard procedure does not work - a device cannot be unlocked by the cable, you can try another way (for example MP 4002, MP 5002, MP C3002, MP C3502, MP C4502, MP C5502):

1. Activate support for enhanced external charge unit management (SP mode 5-113-002 to 1)

2. Navigate to System Settings > Administrator Tools > Enhanced External Charge Unit Management

3. Here choose what features have to be blocked (usually copy, scan)

4. Also make sure the Key Counter Management in administrator tab has all functions turned OFF.

Procedure for MP C2003, MP C3003, MP C3503, MP C4503, MP C5503 and MP C6003 devices:

• In case YSQC0-013-0000 Cable Ricoh (4-pin)/YSQC0-059-0000 Cable Ricoh (4-pin) v2 is used set SP 5113-1 to value 0 and SP 5113-2 to value 0.

1. Navigate to system settings > administrator tools > key counter management

2. Here choose what features have to be blocked (usually copy, scan)

• In case YSQC0-012-0000 Cable Ricoh (20-pin) is used set SP 5113-1 to value 1 and SP 5113-2 to value 0.

1. Navigate to system settings > administrator tools > external charge unit management

2. Here choose what features have to be blocked (usually copy, scan)

Examples of blocking cable connection:

Smart Blocking Cables for Hardware Terminals

YSQC0-012-0000
Smart Cable Ricoh (20-pin)

EXTENSION SET FROM RICOH MUST BE ATTACHED BEFORE THE CABLE CAN BE CONNECTED

YSQC0-013-0000
Cable Ricoh (4-pin)

YSQC0-059-0000
Cable Ricoh (4-pin) v2