Configuration of IPP and IPPSSL

This configuration is required for using IPP and IPPSSL.

  1. Login MFD's web interface as administrator
  2. Navigate to the Network tab
  3. Continue to IPP Setting
  4. Change the settings as shown below:
  5. Enable IPP Setting option
  6. Enable Accept IPP job option

Configuration of IPP over SSL

This configuration is required for using IPPSSL.

  1. Navigate to the Security tab
  2. Continue to PKI Settings > Device Certificate Setting
  3. Use the New Registration button
  4. Select the Request a Certificate option > OK
  5. Insert details of your organization > OK
  6. A message: Certificate Request was successful is displayed > OK
  7. Copy or Save a Certificate Signing Request Data and submit them to your certification authority
  8. Create a certificate with your certification authority
  9. Continue on Security tab > PKI Settings > Device Certificate Setting
  10. Select your Requesting Certificate and press the Setting button
  11. Use Install a Certificate option > OK
  12. Add certificate from your certification authority (the certificate you have created in step 8) > Press the Install button
  13. A message with the result of installation will be displayed
  14. Continue to PKI Settings > SSL Setting
  15. Set Mode using SSL/TLS to Admin. Mode and User Mode
  16. Set Encryption Strength to encryption which you use (if you are not sure which encryption use, set attribute to AES-256, 3DES-168, RC4-128, DES-56, RC4-40)