This manual is applicable also for Develop, Olivetti and Aurora devices.

Requirements

  • Correct firmware is installed on MFD (for more details see HCL – Konica Minolta)

  • MFD is OpenAPI 3.5 or higher if embedded accounting / application shortcuts / web browser terminal functionality is required. Models that support OpenAPI 3.5 or higher may need HDD and/or additional memory installed (for more details see HCL – Konica Minolta)

At Glance

  1. Configure and enable SSL
  2. Disable the Certificate Verification Settings option
  3. Enable OpenAPI on a device
  4. Configure SSL for OpenAPI and TCP Socket communication
  5. Configure region (Develop only)
  6. Disable all other authentications (User Account Track, ID & Print, key counter, Vender2 cable etc.)
  7. Add domain DNS suffix in Network settings - Default DNS domain name (in case a host name for SPOC is used)
  8. Configure the Windows print driver
  9. Install loadable driver (if Card authentication is required)
  10. Configure USB card reader settings (if authentication by CARD is required)