This topic describes how to configure IPP/IPPSSL on Konica-Minolta printers.

Configuration of IPP and IPPSSL

This configuration is required for using IPP and IPPSSL.

  1. Login MFD's web interface as administrator.
  2. Navigate to Network tab.
  3. Continue to IPP Setting.
  4. Enable IPP Setting option and enable Accept IPP job option.

    When available set IPP-SSL Settings to SSL Only

Configuration of IPP over SSL

This configuration is required for using IPPSSL.

  1. Navigate to Security tab.
  2. Continue to PKI Settings > Device Certificate Setting.
  3. Use New Registration button.
  4. Select Request a Certificate option > OK.
  5. Insert a details of your organization > OK.
  6. A message: Certificate Request was successful is displayed > OK.
  7. Copy or Save a Certificate Signing Request Data and insert them to your certification authority.
  8. Create a certificate on your certification authority.
  9. Continue on Security tab > PKI Settings > Device Certificate Setting.
  10. Select your Requesting Certificate and press Setting button.
  11. Use Install a Certificate option > OK.
  12. Add certificate from your certification authority (the certificate you have created in step 8) > Press Install button.
  13. A message with the result of installation will be displayed.
  14. Continue to PKI Settings > SSL Setting.
  15. Set Mode using SSL/TLS to Admin. Mode and User Mode. Set Encryption Strength to enctyption which you use (if you are not sure which encryption use, set attribute to AES-256, 3DES-168, RC4-128, DES-56, RC4-40).