C353, C253, C203, C650, C550, C451

1. Insert CF card (max 256 MB).

2. Extract MFP archive with drivers to disk.

3. Go to the directory according to the device code name.

4. Run command mkcfldr.bat (device code) (CF drive letter) - for example mkcfldr.bat mi2 e:

5. Turn off the MFD.

6. Insert the CF card in MFD.

7. Turn on the MFD.

8. Wait for driver download.

9. Turn off the MFD and remove the card.

10. Turn on the MFD.

GangesM/LaplataM

501, 421, 361, 751, 601

A Konica Minolta field service engineer should install relevant firmware version.

C360, C280, C220

1. Copy A0EDFW.tar to the root directory of a USB flash drive.

2. Insert the USB flash drive into the USB port at the rear side of the main body.

3. Turn on the main switch.

4. Select YES and touch the START button displayed on the panel.

5. When the downloading process was finished, the message of Download Complete comes out on the panel.

6. Turn off the main switch and remove the USB flash drive.

C652, C552, C452

1. Copy A0P0FW.tar to the root directory of a USB flash drive.

2. Insert the USB flash drive into the USB port for service at the rear side of the main body. (Remove the screw and lift up the cover of the USB port)

3. Turn on the main switch.

4. Select YES and touch the START button displayed on the panel.

5. When the downloading process was finished, the message of Download Complete comes out on the panel.

6. Turn off the main switch and remove the USB flash drive.

423, 363, 283, 223

1. Copy A1UDFW.tar to the root directory of a USB flash drive.

2. Insert the USB flash drive into the USB port for service at the rear side of the main body. (Remove the screw and lift up the cover of the USB port)

3. Turn on the main switch.

4. Select YES and touch the START button displayed on the panel.

5. When the downloading process was finished, the message of Download Complete comes out on the panel.

6. Turn off the main switch and remove the USB flash drive.