Requirements

  • Correct FW installed (for more details see HCL – Konica Minolta)

  • MFD must be OpenAPI 3.5 or higher if embedded accounting / application shortcuts / web browser terminal functionality is required. 

  • Models that support OpenAPI 3.5 or higher usually need HDD and/or additional memory installed (for more details see HCL – Konica Minolta )

  • If SafeQ on-line print accounting is required
    • No ZERO counters. Normal (A5/A4/letter) page copy, normal page print, large (A3/legal/tabloid) page copy, large page print counter must not be 0
    • MFD Service Menu > Counter setting > total counter mode – MODE 2 is set!

At Glance

  1. Install loadable driver (if authentication by CARD is required)
  2. KM - Configuring and Enabling SSL
  3. KM - Disable the Certificate Verification Settings option
  4. KM - Enable OpenAPI on a device (especially when external terminal was used before embedded installation)
  5. KM - Configure SSL for OpenAPI and TCP Socket communication
    1. KM - Using the MFP Web interface to configure SSL settings
    2. KM - Using the MFP Panel to configure SSL settings
  6. KM - Configure switches
  7. KM - Configuring USB Card Reader Settings (if authentication by CARD is required)
  8. KM - Configure Print without authentication option (if printing of documents, that are sent directly to the MFP's IP address is required)
  9. KM - Disable the ID and print option on the MFD
  10. KM - Configure User Authentication and Account Track
  11. KM - Install loadable driver
  12. KM - Disable all other authentications (User Account Track, key counter, Vender2 cable etc.)
  13. KM - Add domain DNS suffix in Network settings - Default DNS domain name (in case a host name for SPOC is used)

Configure print driver as follows:

  1. Printer properties - Configure - Device Options are configured to support all possible features (Punch unit, Finisher etc.)  
  2. Printer properties - Configure - Obtain Settings - Auto = not checked
  3. Printer properties - Configure - User Authentication = disabled
  4. Printer properties - Configure - Account Track = disabled
  5. Printer properties - Ports - Enable printer pooling is checked + additional ports are created and checked to be used (remove windows print spooling bottleneck)