If any of the following components are used for releasing print jobs (Dispatcher Paragon FlexiSpooler,Dispatcher Paragon Spooler, Dispatcher Paragon Client v3), they have to be updated to version from Build 62 or higher.
Online accounting is not available.
Direct printworks but the print jobs are performed even when the user has insufficient credit.
Print Allworks but if the user is out of credit, the printing continues and a debt record is created.
Scan Mixed Size Originals are not supported.
When swiping a card at the card reader and the device is in a sleep mode, the user is not authenticated.
SSMI 1.4 or higher is required for the proper function of Dispatcher Paragon Payment System. In case the SSMI version is lower, the quota system is not applied and user can reach negative balance.
EPA card readers are not supported.
Enableetcd to avoid duplicate accounting records on Management Service cluster.
When you setSystem Settings>Common Service Settings>Screen/Button Settings>Screen Defaultto valueCustom Service 4 – Dispatcher Paragon Authenticationon the MFD, user is redirected to Dispatcher Paragon Authentication screen after language change even if user is already authenticated.
Scan Workflows withCompact PDFare limited based on the possibilities of the MFD:
MFD should be capable of "MRC Compression".
Color mode should be either "Grayscale" or "Full Color"
Resolution should be "Low", "Normal" or "Fine".
Scan Workflows withJPEG output format will result in aTIFF output file if the color was set toBlack and White or the color was Auto and the MFD detected a black and white paper.
Scan server type "SwA" (SOAP with attachments) is not supported on YSoft SafeQube 2 and onYSoft OMNI Bridge™
In case "SwA" (SOAP with attachments) is used as scan server type, the maximum number of files that can be received is limited to 200 by the possibilities of the device. This means that:
For single page formats like JPEG and TIFF this means that the maximum number of pages that can be scanned in one scan workflow session is 200.
The limit of 200 as maximum number of pages also applies to all output formats when OCR processing step is used (Searchable PDF, MS Word, ...) however you are able to overcome this limitation by setting the ocrInputFileType system property to either PDF or Multipage TIFF format.
For multipage formats like PDF and Multipage TIFF there is no limitation, as all pages are transferred in one file.
The terminal might not work properly if the MFD certificate validation is enabled (configuration optionenableMfdServerCertificateValidation).
Maximum length of username is 32 bytes, if it's longer authentication will fail with an error.
Print job notifications about the status of the Spooler, which are shown in the terminal when the configuration option showSpoolerAvailabilityNotifications is enabled, are not working. The print flow in the screen is not working properly and the job might fail to print.
For username consistency in the printed jobs listed in the job history between management interface on a server side and CentreWare Internet Service on a device side, during device installation device back-end has to be set to IPP, IPP over SSL, or LRP (not default TCP/IP Raw).
In order to install, uninstall, reinstall or delete device, it needs to be in a power saver mode.
Finishing options
Proper functionality of Advanced Finishing options is guaranteed only when using one of Dispatcher Paragon Universal Print Drivers.
Quotas
Direct printand thePrint Allfunctionality are not fully controlled by the quota mechanism. While quotas are correctly decreased, user can perform operations even after reaching zero. Therefore, it is recommended to disable these features while using print quotas.
It is not possible to use quotasPrint,Copy,Color,BW(but it is possible to use their combinations, e.g.Print Color)
Using theAll Pagesquota (which is a quota for any operation of any color):
WithfujiXeroxEnableDefaultQuotaTogglingStrategyenabled, only half of the quota can be used for printing, the other half is divided between BW and color copy jobs. If user has quota for all pages = x, then
BW Copy = x/4
Color Copy = x/4
Print = x - x/4 - x/4
WithfujiXeroxEnableDefaultQuotaTogglingStrategydisabled, when user choosesCopyoperation, the quota balance is divided between BW and color copy jobs. If user has quota for all pages = x, then
BW Copy = x/2
Color Copy = x - x/2
Dispatcher Paragon Embedded Terminal for FUJIFILM BI AIP 7
Requirements
Embedded Terminal is a software extension of the FUJIFILM BI devices.
If any of the following components are used for releasing print jobs (Dispatcher Paragon FlexiSpooler,Dispatcher Paragon Spooler, Dispatcher Paragon Client v3), they have to be updated to version from Build 62 or higher.
Online accounting is not available.
Direct print works but the print jobs are performed even when the user has insufficient credit.
Print All works but if the user is out of credit, the printing continues and a debt record is created.
Scan Mixed Size Originals are not supported.
When swiping a card at the card reader and the device is in a sleep mode, the user is not authenticated.
SSMI 1.4 or higher is required for the proper function of Dispatcher Paragon Payment System. In case the SSMI version is lower, the quota system is not applied and user can reach negative balance.
EPA card readers are not supported.
Enable etcd to avoid duplicate accounting records on Management Service cluster.
When you set System Settings > Common Service Settings > Screen/Button Settings > Screen Default to value Custom Service 4 – Dispatcher Paragon Authentication on the MFD, user is redirected to Dispatcher Paragon Authentication screen after language change even if user is already authenticated.
Scan Workflows with Compact PDF are limited based on the possibilities of the MFD:
MFD should be capable of "MRC Compression".
Color mode should be either "Grayscale" or "Full Color"
Resolution should be "Low", "Normal" or "Fine".
Scan Workflows with JPEG output format will result in a TIFF output file if the color was set to Black and White or the color was Auto and the MFD detected a black and white paper.
Scan server type "SwA" (SOAP with attachments) is not supported on YSoft SafeQube 2 and onYSoft OMNI Bridge™
In case "SwA" (SOAP with attachments) is used as scan server type, the maximum number of files that can be received is limited to 200 by the possibilities of the device. This means that:
For single page formats like JPEG and TIFF this means that the maximum number of pages that can be scanned in one scan workflow session is 200.
The limit of 200 as maximum number of pages also applies to all output formats when OCR processing step is used (Searchable PDF, MS Word, ...) however you are able to overcome this limitation by setting the ocrInputFileType system property to either PDF or Multipage TIFF format.
For multipage formats like PDF and Multipage TIFF there is no limitation, as all pages are transferred in one file.
The terminal might not work properly if the MFD certificate validation is enabled (configuration option enableMfdServerCertificateValidation).
Maximum length of username is 32 bytes, if it's longer authentication will fail with an error.
Print job notifications about the status of the Spooler, which are shown in the terminal when the configuration option showSpoolerAvailabilityNotifications is enabled, are not working. The print flow in the screen is not working properly and the job might fail to print.
For username consistency in the printed jobs listed in the job history between management interface on a server side and CentreWare Internet Service on a device side, during device installation device back-end has to be set to IPP, IPP over SSL, or LRP (not default TCP/IP Raw).
In order to install, uninstall, reinstall or delete device, it needs to be in a power saver mode.
Finishing options
Proper functionality of Advanced Finishing options is guaranteed only with Dispatcher Paragon Universal Print Driver
Quotas
Direct print and the Print All functionality are not fully controlled by the quota mechanism. While quotas are correctly decreased, user can perform operations even after reaching zero. Therefore, it is recommended to disable these features while using print quotas.
It is not possible to use quotas Print, Copy, Color, BW (but it is possible to use their combinations, e.g. Print Color)
Using the All Pages quota (which is a quota for any operation of any color):
With fujiXeroxEnableDefaultQuotaTogglingStrategy enabled, only half of the quota can be used for printing, the other half is divided between BW and color copy jobs. If user has quota for all pages = x, then
BW Copy = x/4
Color Copy = x/4
Print = x - x/4 - x/4
With fujiXeroxEnableDefaultQuotaTogglingStrategy disabled, when user chooses Copy operation, the quota balance is divided between BW and color copy jobs. If user has quota for all pages = x, then