Dispatcher Paragon

Hardware terminals

Terminal	Comments	Dimensions
UltraLight	Terminal interaction is accomplished via numeric capacitive keyboard, print/copy buttons, status LEDs and/or sound signals. Terminal includes an integrated card reader for authentication by various types of cards (see External Terminal Authentication Matrix). Terminal includes 2-port 10/100 Mbit switch. Configuration of a terminal is done remotely from a configuration utility on any workstation via secured TCP/IP or UDP connection Network/power cables are connected from the top of the terminal. See Using YSoft SafeQ Terminal UltraLight for user interface details and YSoft SafeQ Terminal UltraLight Installation Guide for installation guides. See Terminal UltraLight specification for more details.	15 × 3.7 × 7.5 cm 500 g
Professional	Terminal interaction is accomplished via a graphical touchscreen display (480 x 272 pixels, color). Terminal includes an integrated card reader for authentication with various types of cards (see External Terminal Authentication Matrix). Terminal contains 4-port 10/100 Mbit switch with fully configurable sockets. Configuration of a terminal is done via the graphical touchscreen display or remotely via a secured TCP/IP connection from the Dispatcher Paragon management interface. Network/power cables are hidden under the cover. See Using YSoft SafeQ Terminal Professional for user interface details and YSoft SafeQ Terminal Professional Installation Guide for installation guides. Professional Terminal Supports Terminal monitoring via SNMP tools.	16.5 × 10 × 5 cm 900 g

Comments and limitations

Terminal cannot work without connection to the Dispatcher Paragon Management Server.
Terminal is capable of restricting access to the device via a third-party interface (FDI/FIH/KC/VI).
Terminal must be connected to TCP/IP network with its own IP address (DHCP ready).
If the terminal fails, copying and scanning are no longer available.
Mounting kit and interface cable are required to connect the terminal to the MFD/printer (terminal mounted to wall/table/MFD uses 1 or 2 screws or double-sided Velcro tape).
Power socket is required within 2m/6ft distance.
Operating conditions: office environment, 5°C - 35°C, max 20% - 80% air humidity without condensation.